Commercial AV & Digital Signage

Commercial AV and Digital Signage Installation in Edmonton

A screen on a wall is easy. A screen that sits flush in a millwork recess, powers on by itself every morning, shows the right content, has no visible cable, and can be serviced without dismantling the fixture around it — that is a different job, and it is decided during the fit-out rather than afterwards.

The failures are consistent and avoidable. A display recessed into a wall with no service access, so replacing it means a carpenter. A media player on the guest Wi-Fi that drops out and leaves a menu board showing a desktop wallpaper. Power and data brought to the wrong side of the screen, so the cable is visible from the customer side. A video wall where the bezels do not line up because the mounting was not shimmed.

We install commercial displays, menu boards, video walls and signage for retail, hospitality and offices across the Edmonton region — including the cabling, power coordination and network behind them, which is the half that determines whether the screens are still working in a year.

Wall-mounted display screen recessed into a backlit retail merchandising wall beneath a Lenses sign
Display recessed and levelled into a backlit merchandising wall, with cabling concealed behind the fixture.

Photographs from our own installations, not stock images.

  • Retail store interior mid-fit-out with stepladders, backlit display walls and ceiling-mounted AV equipment
    Store fit-out in progress: display mounting, ceiling AV and cable pathways installed ahead of merchandising.

Who This Service Is For

The situations where this work is usually the right answer.

Retail fit-outs

Stores under construction where displays recess into fixtures and the cable and power paths have to be right before the millwork closes up.

Restaurants and quick service

Menu boards, order-confirmation screens and back-of-house displays that have to switch on and show the correct content without staff intervention.

Offices and boardrooms

Meeting room displays, conferencing hardware and shared-screen setups that need to work for whoever walks in, without a support call.

Sites with signage that has stopped working

Screens showing an error, a blank desktop, or last month's content because the player fell off the network and nobody noticed.

What the Installation Includes

Everything below is part of a standard engagement, not a list of chargeable extras.

  • Coordination with your builder, millworker and electrician during fit-out
  • Mount selection: flush, recessed, articulated, ceiling and pole
  • Structural fixing into studs, blocking or backing — not into drywall alone
  • Displays levelled and shimmed, which is what makes a video wall line up
  • Power and data brought to the correct side of the screen before it is closed in
  • Service access planned so a failed display can be replaced without demolition
  • Cable concealed in wall, conduit or fixture rather than trunked across a surface
  • Media player installation, mounting and configuration
  • Wired network to each player — signage on guest Wi-Fi is the usual cause of failure
  • Automatic power scheduling so screens come on and off without staff
  • Content management setup and a walkthrough for whoever will update it
  • Remote monitoring so a screen that drops offline is noticed by us, not a customer

Our Process

How a project runs from first contact to handover.

  1. Design coordination

    We get involved during the fit-out, with the builder and millworker, so recesses, backing, power and data are right before anything is closed in.

  2. Rough-in

    Data and conduit run to each display position, and backing confirmed where a mount needs to fix into structure.

  3. Mounting and installation

    Mounts fixed and levelled, displays hung and shimmed, players mounted behind or beside the screen with cable concealed and service access preserved.

  4. Network and content setup

    Players wired to their own network segment, content management connected, and power scheduling set so screens run on their own.

  5. Commissioning and handover

    Every screen verified through a full power cycle, content confirmed, and a walkthrough with whoever updates it day to day.

Equipment We Support

Commercial displays
Commercial-grade panels rated for long daily operating hours, unlike consumer televisions which are not built to run twelve hours a day and usually void their warranty when used that way.
Mounts and video wall hardware
Flush, recessed, articulated, ceiling and pole mounts, plus video wall mounts with micro-adjustment so panels align at the bezel.
Media players and signage software
Players mounted behind or beside the display and connected to your content management platform, so screens update remotely rather than by USB stick.
Menu boards and order displays
Multi-screen menu boards and order-confirmation displays configured for the layout and daypart scheduling a quick-service operation needs.
Meeting room AV
Room displays, conferencing cameras, microphones and connectivity, set up so a guest can connect without needing to find someone.

Where We Work

Commercial AV and signage installation across Edmonton, Sherwood Park, St. Albert, Spruce Grove and Leduc, with fit-out work for retail and hospitality groups throughout Alberta where every location has to be built to the same specification.

See every area we serve across Alberta
  • Edmonton
  • Sherwood Park
  • St. Albert
  • Spruce Grove
  • Leduc
  • Fort Saskatchewan
  • Calgary
  • Red Deer
  • Grande Prairie
  • Fort McMurray

Frequently Asked Questions

Common questions about commercial av & digital signage in Edmonton and across Alberta.

Request a Quote

Tell us about the site and what you need. We will come back to you with a straight answer about what the work involves and what it costs.

Serving Edmonton and AlbertaWe reply within one business dayinfo@itechinternationalinc.com