IoT and Smart Automation in Edmonton and Alberta
Connected devices fail in a characteristic way. They are installed one at a time, each with its own app and its own cloud account, all sharing the same flat network as the office computers. Individually each works. Collectively they become impossible to manage, and they quietly become the weakest point in the building's security — an unpatched camera or sensor is a well-documented route onto a network.
We approach IoT as a network problem first. Devices go on their own segment where they can reach what they need and nothing else, with a documented inventory of what is installed, what firmware it runs and what it talks to. That single decision prevents most of the trouble connected devices cause.
The second half is making the monitoring useful. A sensor that sends an alert nobody sees, or that sends fifty a day until everyone mutes it, is worse than no sensor. We configure thresholds and escalation so an alert means something — a freezer warming at 3am, a leak under a floor, a generator that failed to start — and reaches someone who can act.
Who This Service Is For
The situations where this work is usually the right answer.
Facilities needing remote monitoring
Buildings and sites where temperature, humidity, water, power or equipment status must be known before a failure becomes damage.
Businesses with unattended premises
Warehouses, shops and storage sites empty overnight and at weekends, where problems currently go unnoticed until someone arrives.
Commercial building operators
Sites automating lighting, HVAC scheduling, access control and energy use across one building or several.
Homeowners wanting it done coherently
Residences with accumulated smart devices across five apps, wanting one system that works reliably and does not expose the home network.
What the Installation Includes
Everything below is part of a standard engagement, not a list of chargeable extras.
- Assessment of what genuinely needs monitoring and what an alert should trigger
- Network segmentation putting IoT devices on their own isolated VLAN
- Firewall policy controlling exactly what devices may reach
- Sensor selection and placement for accurate, meaningful readings
- Wired, Wi-Fi, Zigbee, Z-Wave or LoRaWAN connectivity as the site requires
- Gateway and controller installation with local processing where appropriate
- Power over Ethernet and backup power for devices that must stay up
- Threshold and escalation configuration so alerts are actionable, not noise
- Dashboard setup showing current status and history in one place
- Integration between systems that would otherwise sit in separate apps
- Firmware update process and a documented device inventory
- Handover documentation covering every device, its location and its purpose
Our Process
How a project runs from first contact to handover.
Requirements and risk review
We establish what must be monitored or automated, what an alert should mean, and who needs to receive it — before selecting any hardware.
Network and system design
Device segmentation, connectivity method, gateway placement and integration points are designed so the deployment is manageable as it grows.
Installation
Sensors, controllers and gateways installed and positioned for accurate readings, cabled and powered, and joined to their isolated network segment.
Configuration and tuning
Thresholds, schedules, automations and escalation paths configured, then tuned over the first weeks so alerts stay meaningful rather than ignored.
Documentation and handover
Device inventory, network detail, dashboard access and a walkthrough, so the system can be maintained rather than becoming a mystery.
Equipment We Support
- Environmental sensors
- Temperature, humidity, water leak, door and power-status sensors, positioned where readings reflect the actual condition rather than the nearest convenient wall.
- Gateways and local controllers
- Hubs that keep automations running locally so the building does not stop working when the internet does, with cloud reporting layered on top.
- Access control and cameras
- Door controllers, readers and camera systems installed on their own segment, with retention and access configured deliberately rather than by default.
- Building systems integration
- Lighting control, HVAC scheduling and energy monitoring integrated so occupancy and schedule actually drive consumption instead of being set once and forgotten.
- Long-range and low-power connectivity
- LoRaWAN, Zigbee and Z-Wave for devices spread across a site or running on batteries, where Wi-Fi would be impractical or drain them too quickly.
Where We Work
IoT and automation installations across Edmonton and the surrounding communities, with remote monitoring deployments at sites throughout Alberta where knowing a condition changed matters more than being nearby.
See every area we serve across Alberta- Edmonton
- Sherwood Park
- St. Albert
- Spruce Grove
- Leduc
- Fort Saskatchewan
- Calgary
- Red Deer
- Grande Prairie
- Fort McMurray
Frequently Asked Questions
Common questions about iot & smart automation in Edmonton and across Alberta.
Related Services
Work that commonly goes with this, and that we handle at the same time.
Commercial Network Installation
Designed and installed business networks: switching, routing, VLAN segmentation, firewalls, PoE and internet failover built to survive a working day.
Commercial Network InstallationEV Charger Installation
Level 2 home chargers and commercial charging stations, installed with proper load assessment and connected so smart charging actually works.
EV Charger InstallationIT Infrastructure Installation
Server rooms and equipment racks built properly: power, cooling, protection, cabling and documentation that outlast the hardware in them.
IT Infrastructure InstallationRemote Site Connectivity
Internet stood up where none exists — construction sites, camps, remote yards and unmanned installations, built to be deployed, moved and recovered.
Remote Site Connectivity
Request a Quote
Tell us about the site and what you need. We will come back to you with a straight answer about what the work involves and what it costs.